At 4X only while the firmware 8.2.7.0, this is a new development branch. Therefore, the last two letters are already changing: D to E (the next one), and L to A (the initial one). Until 8.3.x.x, only the last letter will change again, i.e. for 4X, the next build 8.2.x.x will be with the index MAMCNEB. Post has been editedCamerado - 20.03.17, 19:52 ---- Xiaomi Mi Max 3, M1804E4A - MIUI 10.2.1.0 PEDCNXM xiaomi.eu MagiskApple iPad Air, A1474 - iOS 12.1.4 We haven't changed since ancient times ... Message 728.03.17, 13:24Visitor [online]Group: Active users Messages 29 Check in: 10.12.15 Reputation: 39TEST POINT Post has been editedvaalf - 30.08.17, 22:53 Message 829.03.17, 10:09Visitor [online]Group: Active users Messages 29 Check in: 10.12.15 Reputation: 39Vietnamese 8.0.2.0 I.Disk Dumps of a network are possible Post has been editedAlooys - 29.03.17, 10:15 Reason for editing: Added Message 931.03.17, 04:35Experienced [offline]Group: Friendssavagemessiahzine.com Messages 421 Check in: 07.06.07 Reputation: 85If the MTP does not work. When you connect the cable to the computer can not see the phone. Found a problem on MUILTIROM It is necessary to register the following lines in system / build.prop: persist.service.adb.enable = 1 persist.sys.usb.config = mtp, adb Taken from Prime 4 (for which they thank you): Post has been editedsnekt - 14.05.17, 13:51 Reason for editing: raised in the topic header 08.04.17, 15:59- : - : - : - : - : - [offline]Group: Friendssavagemessiahzine.com Messages 4434 Check in: 09.01.12 Reputation: 754 dimonius747, ag70, features: • Kernel supports init.d • Build.prop and init.d tweaks and scripts • Ram optimization scripts • battery optimization scenarios • 3way food menu (from previous version) • Gps.conf tweaks • SYSCTL tweaks • Some Smiui debugged binaries • Sqlite optimizer • Apps zipalign when downloading • HW acceleration off • Change the default theme (The same is under the changelog spoiler)I use it myself, only on another device. Outwardly, nothing is different, but a lot of added system. Several third-party applications, Google services, Root explore, Dolby Atmos, CM transfer, Flash player. Still have a mini reviewXiaomi Redmi 3/3 Pro - MIUI Firmware (OS 5.x) (Post hottabi489 # 56296404) Post has been editeddjdante - 08.04.17, 16:05 ---- Xiaomi Redmi Note 5 Pro Global, MIUI10 10.2.1.0 11.04.17, 12:10Life is Beautiful!! [offline]Group: Friendssavagemessiahzine.com Messages 5645 Check in: 17.02.06 Huawei Mate 20 Pro LYA-L29 Reputation: 4712I present my assembly MIUI Disclaimer Dear, first of all I do all the assemblies for myself or at the personal request of good people. As I consider it necessary and when it is convenient for me. All wishes are accepted, but what to do and what not, I decide, as a rule, individually. If it is written that no bugs are detected, this does not mean that they are not 100% and can not be, this only means that they have not yet been discovered. Write about found in a personal with a detailed description of both the installation and the sequence of actions before the appearance of the bug and we will decide. Anyone who thinks that he has the right to demand something, make claims, etc., pass by safely and do not litter the air. MIUI9 8.3.15 of 03/21/2018 based on xiaomi.eu Download md5: 8727F96D3D0C2CB00A87131078FE1982 All versionshere. Features
Only through TWRP. In the transition from previous versions of this assembly can be put on top. With a clean installation, we make wipe cache, dalwick and date About Xposed Not all modules work with MIUI, so I will describe a few that I know. Everything can be downloaded inrepositoriesXposed.
Reason for editing: new version ---- 12.04.17, 14:06Fineline developer [online]Group: Friendssavagemessiahzine.com Messages 2158 Check in: 21.07.11 Xiaomi Redmi 4X 2/16 Reputation: 1220MIUI 8.2.0.2.MAMMIEA backup for TWRP INSTALLATION unpack the archive TWRP.zip on the card or in the internal memory the path must be TWRP \ BACKUPS \504c9aec7ce4\ 1970-01-10--08-23-41_MMB29M Where504c9aec7ce4You need to replace it with your serial number so that twrp saw the backup, the serial number see Settings / General Information go to TWRP in the section Cleaning Selective cleaning and tick Dalvik / ART Cache Cache System Data Cust We make Swap according to the inscription "Swipe for cleaning" Then we go to the Recovery menu and the checkboxes should be on three sections (System-Cust-boot) We make Swap by the inscription "Swipe for Restoration" Reboot we go through the setup procedure, all you have is MIUI 8.2.0.2.MAMMIEA DOWNLOAD patches Extended reboot menu -download screen Post has been editedvaalf - 04.05.17, 21:52 Reason for editing: Raised in the topic header 20.04.17, 12:08Fineline developer [online]Group: Friendssavagemessiahzine.com Messages 2158 Check in: 21.07.11 Xiaomi Redmi 4X 2/16 Reputation: 1220TWRP 3.1.1-0 for Redmi 4x Entry to the recovery by clamping the three buttons "+" "-" "power" or if you have MIUI firmware settings / About / About the system / System update / three points above / Reboot in Recovery change history 3.1.1-0 Made two versions on the core from 6 androyd and on the core from 7 anroid (This is needed to reboot into the recovery from the system, for example from the advanced reboot menu or if there is a MIUI runoff Settings / About phone / System update / three points at the top / Reboot in Recovery or after wipe A reboot will occur if the kernel of the recovery will coincide with the kernel version of the androyd, respectively, if it costs 7 androyd and the recovery on the kernel is from 6 androyd, then the reboot will not work And so the recovery will work but it will only be possible to enter it by clamping the three buttons "+" "-" "power" for this reason, two versions on different cores) fixed reboot in recovery after wipe removed the twrp application installation item updated SuperSU PRO v2.82 SR1 patched Cobra1111 3.1.0-3 Replaced SuperSU Pro v2.79 SR3 with SuperSU Pro v2.79 SR4 with support for Android 7 3.1.0-2 Added password reset (fingerprint, pattern, password) This is necessary not only if you forget the password, but if you restore the backup, you will not be able to get to the desktop even if you remember the password. It is located on the same path Advanced / Tools / Reset password (after having dropped the fingerprint, go to the print settings and delete the old ones, they are no longer active, then we create new ones) password reset screen 3.1.0-1 added the ability to flash images System (corrected) Cust Now the firmware for MiFlash can be installed via twrp with the firmware of three images System, Cust, Boot instructions below screenshots Along the Way Extras / Tools Added Root installation rights SuperSU Pro v2.79 (no problems with mtp were observed) Complete removal of Root rights Disabling encryption check in Boot needs this to install official firmware for both .img images and .zip archives (read more about encryption here) screenshots Added the ability to make a backup of the System partition as an .img image can be useful screenshots How to install the official firmware for MiFlash or .img images via twrp Before this procedure, it is better to make a full backup of all sections !!! and save to PC we drop three images system.img, cust.img, boot.img on the memory card (or in the internal drive) go to the section Cleaning / Selective cleaning and tick: Dalvik / ART Cache - Cache - Data - Cust We make Swap according to the inscription "Swipe for cleaning" Go to the Install / Install Img menu and select our image. 1 - system.img and select the partition for the firmware System Image wait for the end of the firmware 2 - cust.img and select the section for firmware Cust waiting for the end of the firmware 3- boot.img and select the partition for the Boot firmware; wait for the end of the firmware And now the most important thing is to go to the Advanced menu / Tools and disable the encryption check - click Check in Boot Otherwise, TWRP will fly off and after re-installation the data section will be encrypted, only the full format will help and this is data loss Disabling encryption should always be done when installing the Official firmware via twrp We press Reboot in OS, we wait for system loading how to install official firmware for stock reovery via twrp Before this procedure, it is better to make a full backup of all sections !!! and save to PC we throw on the memory card (or in the internal drive) archive with firmware in .zip format go to the section Cleaning / Selective cleaning and tick: Dalvik / ART Cache - Cache - Data - Cust We make Swap according to the inscription "Swipe for cleaning" Go to the Installation menu, select the archive with the firmware We make Swap by the inscription "Swipe for firmware" And now the most important thing is to go to the Advanced menu / Tools and disable the encryption check - click Check in Boot Otherwise, TWRP will fly off and after re-installation the data section will be encrypted, only the full format will help and this is data loss Disabling encryption should always be done when installing the Official firmware via twrp We press Reboot in OS, we wait for system loading about backup As I wrote above, I added the ability to save the system in img format Just with a full backup, uncheck System Image, otherwise two systems will be saved in different formats, respectively, the backup will increase This function is only needed when you want to save only the system in the .img format. You will end up with the system_image.emmc.win file, just rename it to system.img update via TWRP The downloaded recovery.img image is uploaded to the memory card or to the phone’s memory reboot into recovery Click installation Choose a drive where the image lies Click Install img choose our recovery.img image choose a partition for the recovery firmware We make svayp on the Swap inscription for firmware reboot recovery If installing TWRP is done without changing the firmware Go to Advanced / Tools and click the check in Boot (by this we disable the encryption check in the boot otherwise. The firmware will not start) For firmware on the MIUI core installation from scratch bootloader must be unlocked !!! ADB drivers must be installed from the header Unzip the archive TWRP_3.1.1-0_Redmi4x_6.zip if you have 6 androids or TWRP_3.1.1-0_Redmi4x_7.zip ate with you 7 android boot to Fastboot key - and power We connect the phone to the PC click batch file Flash-Redmi 4x TWRP.bat We agree with the section firmware (4 times you will need to press Enter) At the end, the phone itself will reboot into the recovery If installing TWRP is done without changing the firmware Go to Advanced / Tools and click the check in Boot (by this we disable the encryption check in the boot otherwise. The firmware will not start) For firmware on a custom kernel 3.18.84 (It is necessary for a normal reboot from recovery to recovery) on the custom core from 7 Androyd recovery.img(22.98 MB)P.S. Found a mistake write toQMSdo not litter the topic Post has been editedsilent27 - 30.11.17, 23:17 Reason for editing: TWRP 3.1.1-0 for Redmi 4x on kernel 3.18.84 22.04.17, 17:46Fineline developer [online]Group: Friendssavagemessiahzine.com Messages 2158 Check in: 21.07.11 Xiaomi Redmi 4X 2/16 Reputation: 1220MIUI 8.2.1.0.MAMMIEA backup for TWRP INSTALLATION unpack the archive TWRP.zip on the card or in the internal memory the path must be TWRP \ BACKUPS \504c9aec7ce4\ 1970-01-10--08-23-41_MMB29M Where504c9aec7ce4You need to replace it with your serial number so that twrp saw the backup, the serial number see Settings / General Information go to TWRP in the section Cleaning Selective cleaning and tick Dalvik / ART Cache Cache System Data Cust We make Swap according to the inscription "Swipe for cleaning" Then we go to the Recovery menu and the checkboxes should be on three sections (System-Cust-boot) We make Swap by the inscription "Swipe for Restoration" Reboot we go through the setup procedure, all you have is MIUI 8.2.1.0.MAMMIEA P.S. If you move from 8.2.0.2. to 8.2.1.0. do not put a tick in the Custom cleaning section Cache, Data, thereby we update the system without affecting the application DOWNLOAD - Yandex DOWNLOAD - Mail patches Extended power menu Blur in Advanced power menu before the application download Removed the gray background in recent applications (blur enabled only when editing smali, and this application should be deodexed for this did not) installation via twrp as a regular archive patch_mod.zip(5.47 MB)Post has been editedsilent27 - 10.05.17, 17:27 Reason for editing: Raised in the topic header 28.04.17, 00:39User [offline]Group: Friendssavagemessiahzine.com Messages 71 Check in: 18.06.14 Xiaomi Mi Note 3 4/64 Reputation: 6Camera MOD for Redmi 4X Will work on firmware Stable ROM: MIUI: 8.1.x.0, 8.2.x.0 Developer ROM: MIUI: 7.3.x, 7.4.x Fashion description HDR Fully working manual mode (time delay, focus, white balance, ISO) without losing scene mode Square mode Full size panorama Slow motion video Audio focus mode for video recording Camera Capture Quick Snap Mode Age mark in the photo (front camera) Set via TWRP HZQ_MIUI_Camera_Mod_SANTONI_170427.zip(127.29 KB)Takenhere 03.05.17, 19:05Local [offline]Group: Friendssavagemessiahzine.com Messages 135 Check in: 26.12.12 Xiaomi Redmi 4 Prime Reputation: 18MIUI 8.2.1.0.MAMMIEA for MiFlash Rebuilt for firmware under MiFlash fromthis message. The modem left the last - V034 (from Chinese 8.2.9.0) Recovery - staffing (from Chinese 8.2.9.0) UPD.It is not recommended to install on a device with a locked bootloader. There is information that you can catch a bootlap (soft brick). For security reasons, it is strongly recommended that you bind the device to the MiAccount before flashing, which will facilitate further revitalization of the tube in the event of turning around. |